E-S4HCON2023 Dumps for Pass Guaranteed - Pass E-S4HCON2023 Exam 2025
E-S4HCON2023 Exam Dumps - Try Best E-S4HCON2023 Exam Questions from Training Expert ValidBraindumps
SAP E-S4HCON2023 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 26
You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
There are 2 correct answers to this question.
- A. Kernel for source release, Windows, SAP MaxDB
- B. Kernel for target release, Windows, SAP HANA
- C. Kernel for target release, Linux, SAP HANA
- D. Kernel for target release, Windows, SAP MaxDB
Answer: A,B
NEW QUESTION # 27
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center, you can see 40 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
- A. These are 40 pairs of Reload processes, so there are 80 R3load processes running.
- B. Without table contents comparison, only 40 R3load processes are being started.
- C. SUM is still running in uptime; the 40 defined Reload processes are considered.
- D. There are 40 Reload processes used for copying and 40 Reload processes for table count verification.
Answer: B
NEW QUESTION # 28
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Uninstall industry extensions not supported by SAP S/4HANA
- B. Install add-on SAP Gateway 7.50
- C. Delete client 066 (Early Watch Client)
- D. Uninstall Fiori apps not released for SAP_UI 7.50
Answer: C,D
NEW QUESTION # 29
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Download it from SAP Support Portal
- B. Apply the corresponding SAP note via SAP Note Assistant
- C. Generate it by analyzing the specific custom code via RFC
- D. Configure it within transaction ATC
Answer: A
NEW QUESTION # 30
You are performing an SAP S/4HANA conversion. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question
- A. TABIM_SHADOW_*
- B. PARMVNT_UPG
- C. PARDIST_SHD
- D. TABIMJJPG
Answer: D
NEW QUESTION # 31
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the most recent entries in SAPup.log
- B. Check the most recent entries shown in file sapevt.trc
- C. Check the system log (transaction SM21) of the SAP system
- D. Check the messages shown by the SUM UI
Answer: A,D
NEW QUESTION # 32
You are performing an SAP S/4HANA conversion. When does the silent data migration (SDM) take place?
- A. Before the start of the SUM technical downtime
- B. During the Execution roadmap step
- C. During the SUM technical downtime
- D. After SUM has ended
Answer: C
NEW QUESTION # 33
You are starting an SAP S/4HANA Conversion. The scenario strategy Downtime Optimized Conversion (DoC) is NOT selectable.What could be the reason?
- A. The SAP S/4HANA Conversion is without DMO.
- B. The SAP S/4HANA Conversion includes a DMO.
- C. The start release is too old for DOC.
- D. The source database is not supported
Answer: D
NEW QUESTION # 34
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correctanswers to this question.
Response:
- A. Check the log files written under "SUM\abap\log"
- B. Check the "Charts Control Center" in the SUM UI
- C. Check logs for jobs starting with "RSUPG_SGEN" in the system
- D. Check the dump size of the database export on disk
Answer: A,B
NEW QUESTION # 35
You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?
- A. The SAP support packages that will be bound to the conversion
- B. The SAP support packages contained in the upgrade media, calculated by the maintenance planner
- C. The SAP support packages in the download directory that are newer than the selected support package stack
- D. The SAP support packages of the support package stack, calculated by the maintenance planner
Answer: C
NEW QUESTION # 36
You are performing an SAP S/4HANA conversion with DMO. You are using the downtime-optimized data conversion (DoC). Which steps can partially be moved to uptime processing? Note: There are 2 correct answers to this question.
- A. Migration
- B. Main import
- C. Software update
- D. Conversion
Answer: A,D
NEW QUESTION # 37
You are executing as SAP S/4HANA Conversion with scenario strategy Standard. When will the shadow instance be stopped for the last time?
- A. As part of the cleanup process
- B. Early in the downtime
- C. Before the downtime starts
- D. At the end
Answer: D
NEW QUESTION # 38
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?
- A. To optimize the activation
- B. To optimize the conversion
- C. To optimize the main import
- D. To optimize the migration
Answer: D
NEW QUESTION # 39
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:
- A. To repeat specific phases during the SUM run
- B. To skip selected phases during the SUM run
- C. To make the progress information within SUM UI more accurate
- D. To auto-fill specific fields on selected screens on the SUM UI
Answer: C
NEW QUESTION # 40
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the corresponding R3trans log files of this phase
- B. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- C. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- D. In the job log for the corresponding job in SM37 (Job Overview)
Answer: B,D
NEW QUESTION # 41
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests named <SID>K0<number>
- B. By searching for transport requests that are assigned to the project SAP_ADJUST
- C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- D. By searching for transport requests in the file umodauto.Ist
Answer: D
NEW QUESTION # 42
......
Latest 100% Passing Guarantee - Brilliant E-S4HCON2023 Exam Questions PDF: https://www.validbraindumps.com/E-S4HCON2023-exam-prep.html
Practice Examples and Dumps & Tips for 2025 Latest E-S4HCON2023 Valid Tests Dumps: https://drive.google.com/open?id=13lnf3ncpsy2BoZRsCF5hY_yZdG5feUKb