Free 365 Days Exam Updates NCSE-Core dumps with test Engine Practice
Updated Verified NCSE-Core dumps Q&As - 100% Pass Guaranteed
NEW QUESTION # 47
A prospect is concerned about the suitability and design of using Nutanix for an upcoming Avaya IP Office migration.
Which type of document should the SE provide?
- A. Filed Advisory
- B. Reference Architecture
- C. Best Practice Guide
- D. Knowledge Base Article
Answer: B
NEW QUESTION # 48
When using Nutanix Sizer, which solution does the Automatic sizing option provide?
- A. The highest performance solution that meets the provided requirements
- B. The lowest cost solution that meets the provided requirements.
- C. A solution that banlances cost and performance, plus a default 25% growth capacity
- D. A solution that meets provided requirements, plus a default 25% growth capacity
Answer: B
NEW QUESTION # 49
One of a prospective customer's security analysts asks about Nutanix's security functionality. The security analyst asks if Nutanix has any feature or capability that reduces the effort required to assess the security with in the Nutanix infrastructure. Which benefit does Nutanix SCMA provide to this prospect?
- A. Notifies the customer of newly discovered/announced vulnerabilities
- B. Enables One-Click remediation of non-compliant security settings
- C. Automatically updates/patches cluster components to the latest code levels
- D. Automates security compliance checking and remediation
Answer: D
NEW QUESTION # 50
A two-node ROBO cluster is configured with a witness VM.
What happens when Node A goes down?
- A. Node B sends a leadership request to the Witness VM and goes into single-node mode.
- B. The- cluster becomes unavailable and goes into read-only mode.
- C. The cluster is unaffected and no administrator intervention is required.
- D. All operations and services on the Node B are shut down and go into a waiting state.
Answer: A
NEW QUESTION # 51
Refer to Exhibit:
An administrator logs in to Prism and sees the status shown in the exhibit within the Hardware Diagram section.
What should the administrator do?
- A. Reseat all disk immediately. If this does not help, reseat the nodes.
- B. Restart all CVMs for the cluster to check, confirm health and repartition and add the disks.
- C. Resolve all alerts and re-import the disks to make sure there is no service disruption.
- D. Check status of applications running on the cluster and call support.
Answer: C
NEW QUESTION # 52
Which AOS feature provides enhanced read performance specifically for virtual desktop environments?
- A. Shadow Clones
- B. Copy on Fist Write
- C. Time Stream
- D. Data locality
Answer: D
NEW QUESTION # 53
Which tool could be used to perform a sizing discovery in a general server virtualization environment running both VMware ESXi and Nutan AHV?
- A. AWR
- B. MAP
- C. RVTools
- D. Collector
Answer: D
NEW QUESTION # 54
A customer has a 3-node cluster configured for RF2 with 100TB of raw disk space. The customer wants to enable Erasure Coding to gain additional usable space. What change will allow EC-X to be enabled?
- A. No changes are required
- B. Increase the size of the default storage pool
- C. Add 1 node to the cluster
- D. Add an additional 30TB to the existing cluster
Answer: C
NEW QUESTION # 55
An SE is in the discovery phase with a new customer. The customer is frustrated with the lack of transparency into their environment with the current monitoring tools. The customer has difficulty correlating the degradation of the end user experience with point-in-time events.
Which Prism feature should the SE demonstrate to show relevant value?
- A. A specific virtual machine's virtual disk Additional Stats
- B. Event tab on the Alerts page
- C. A specific virtual machine's Performance Summary
- D. Analysis page with custom charts and event reporting
Answer: D
NEW QUESTION # 56
30. A healthcare prospect looking to refresh their infrastructure with Nutanix has an initiative to migrate 5 Petabytes of unstructured, archived patient dat a. Which Nutanix product should be the focus of the discussion?
- A. Objects
- B. Volumes
- C. Mine
- D. Files
Answer: A
NEW QUESTION # 57
A systems engineer is building a solution for a federal government prospect that requires. FIPS 140-2 Level 2 encryption for data at rest. Which two items are required to deliver a solution that meets the encryption standard? (Choose two)
- A. A supported key Management Server
- B. Nutanix Prism Pro Licensing
- C. Self-Encrypting Drive
- D. Nutanix Software Encryption
Answer: A,C
NEW QUESTION # 58
During a sales motion with a new prospect, the prospect and SE agree to evaluate Nutanix and a computing platform using XRay.
The prospect is currently using 3-tier architecture and considering Nutanix and HPE Simplivity.
Which two details must be discussed with the prospect before the POC starts? (Choose two)
- A. ldentify appropriate POC hardware
- B. Gather details of customer's existing 3-tier hardware
- C. A test plan with agreed upon success criteria
- D. Model of Fibre Channel switch
- E. What type of external storage will be connected
Answer: A,C
NEW QUESTION # 59
A prospect is replacing a 3-tier virtualization infrastructure made up of several ESXi hosts and a SAN. The prospect recently bought a new 4-socket server to host their SQL server workload which uses the same SAN.
Which feature allows the prospect to continue using their new server
without buying another SAN?
- A. Virtual Fiber Channel Controller
- B. Heterogeneous clusters
- C. Acropolis Container Services(ACS)
- D. Acropolis Block Services (ABS)
Answer: D
NEW QUESTION # 60
Which configuration can be used the data encryption on a nutanix cluster regardless of the hardware configuration?
- A. SSL Certificate
- B. Software Encryption
- C. Self-Encryption Drives
- D. In-line Compression
Answer: C
NEW QUESTION # 61
In the event of a primary datacenter failure, a customer wants to power on virtual machines in a secondary datacenter with an RPO and RTO of no more than 15 minutes. Upon further discussions with the customer, the systems engineer (SE) finds that round trip latency between the 2 sites can reach up to 6ms.
Which Nutanix feature should the SE recommend?
- A. Fault Tolerance FT1
- B. NearSync
- C. Metro Availability
- D. Rack Awareness
Answer: B
NEW QUESTION # 62
An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of the following:
* 30 nodes: distributed 10 nodes per rack across three 42U rack
* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)
* Current cluster utilization is 900TB storage
Which configuration changes should be made to make sure that the cluster meets the requirements?
- A. Expanse the cluster by adding 8 nodes to a new 42U rack
- B. Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.
- C. Expanse the cluster by adding 9 nodes to a new 42U rack
- D. Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.
Answer: C
NEW QUESTION # 63
A customer wants to decrease costs and increase efficiency by eliminating NAS silos and adopting a cloud-like mindset. Which Nutanix product meets these requirements?
- A. Nutanix Files
- B. Nutanix Xi Frame
- C. Nutanix Beam
- D. Nutanix Calm
Answer: A
NEW QUESTION # 64
Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)
- A. Configures a VLAN with an IP subnet and assigns a group of IP addresses
- B. Allows proxy server settings to be set up for a defined network
- C. Configures firewall rules to prevent or allow certain TCP/IP traffic
- D. Allows AHV to assign IP addresses automatically to VMs using DHCP
Answer: A,D
NEW QUESTION # 65
A customer is evaluating Nutanix to replace their existing 200TB filer. The filer is used to store archived images. To achieve maximum storage density. RF2 and Erasure Coding are proposed. What is the minimum number of nodes required to support the maximum Erasure Coding stripe size of 4/1 (data/parity)?
- A. 5 Nodes
- B. 7 Nodes
- C. 4 Nodes
- D. 6 Nodes
Answer: C
NEW QUESTION # 66
A prospective customer's migration to their new SAN started six months ago and is still not complete. The VP of IT states the previous migration to the existing SAN took almost eight months to complete.
How should the systems engineer describe Nutanix hardware refreshes to this prospective customer?
- A. Setting and AHV node's EVC mode is a very fast process that will shorten the upgrade time
- B. Manual hardware refreshes take tune and the systems engineer understands the customer's current situation
- C. New nodes can be added to an existing cluster. and then the old nodes can be removed
- D. With AHV, vMotion between clusters occurs faster than on a SAN based cluster.
Answer: C
NEW QUESTION # 67
A customer needs to image nodes that are either bare metal or regime a different hypervisor.
Which Nutanix tool should be used?
- A. Era
- B. Move
- C. Prism Centrail
- D. Foundation
Answer: D
NEW QUESTION # 68
Refer to Exhibit.
A systems engineer is creating a configuration in Sizer for a customer that is building an app for use as an eBooks repository the app requires the following two workloads:
1. 50 generic web server VMs, each with 2 vCPUs on a 4:1 vCPU ratio, 8 GB of RAM, and 100GB of storage each
2. A fileserver workload with 80TB of usable storage available, which contains mostly PDF's and pre- compressed data.
Any reduction in performance of the web servers must be avoided. After entering the workload with default options, the Sizer outputs the configuration shown in the exhibit.
Which adjustment does the systems engineer need to make to the scenario to meet the performance requirements?
- A. increase the RAM of the web server workload to 10 GB per VM.
- B. Switch to manual sizing and increase the RAM of the node configuration to 384 GB
- C. increase the vCPU:CPU ratio of the Webserver workload to 6:1
- D. Switch to manual and change the CPUs of the node configuration to a dual 10 core model
Answer: B
NEW QUESTION # 69
A systems engineer needs to size a new project that requires offsite backup using Vertam The prospect requires an RPO GE 24 hours, and the ability to restore from the past 7 days of backups The prospects data change rate is 1% How should the SE configure Sizer for this scenario?
- A. A
- B. B
- C. C
- D. D
Answer: C
Explanation:
Explanation/Reference:
Yes / Mine / Veeam
NEW QUESTION # 70
......
Provide Valid Dumps To Help You Prepare For Nutanix Certified Systems Engineer-Core (NCSE-Core) Exam: https://www.validbraindumps.com/NCSE-Core-exam-prep.html
NCSE-Core Dumps Questions [2023] Pass for Exam: https://drive.google.com/open?id=1jAW4hTvbat0na0Fj6TfIfRYeosXIm6h9