Juniper JN0-362 Dumps - The Sure Way To Pass Exam
JN0-362 Exam Questions (Updated 2021) 100% Real Question Answers
NEW QUESTION 24
Click the Exhibit button.
You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
Referring to the exhibit, which configuration accomplishes this task?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 25
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. generate
- B. static
- C. aggregate
- D. kernel
Answer: A
NEW QUESTION 26
You are asked to design a Layer 2 VPN service between service provider networks that needs Ethernet transport capabilities. The VPN should support two or three endpoints. Which Layer 2 VPN technology should you propose?
- A. LDP-signaled VPLS
- B. BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format
- C. BGP Layer 2 VPN
- D. LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format
Answer: B
NEW QUESTION 27
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP- signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?
- A. Configure the no-propagate-ttl parameter for each LSP on the egress device
- B. Configure the no-decrement-ttl parameter for each LSP on the egress device
- C. Configure the no-propagate-ttl parameter for each LSP on the ingress device
- D. Configure the no-decrement-ttl parameter for each LSP on the ingress device
Answer: A
NEW QUESTION 28
Click the Exhibit.
You have just configured IS-IS, but the adjacency is not coming up.
Referring to the exhibit, what is the cause?
- A. Only one side is configured using the point-to-point parameter.
- B. The family iso parameters is missing on the interfaces.
- C. One router is configured for Level 2 only.
- D. The routers must be in different areas.
Answer: A
NEW QUESTION 29
Click the Exhibit button.
You are asked to configure OSPF for the network? Referring to the exhibit, how should Area 1 be configured?
- A. totally stubby area
- B. backbone area
- C. stub area
- D. not-so-stubby area
Answer: C
NEW QUESTION 30
Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge domain as shown in the exhibit, what happens to frames that arrive that contain unknown unicast destination addresses?
- A. They are flooded.
- B. They are forwarded to the IRB interface.
- C. They are dropped.
- D. The are forwarded to the default gateway.
Answer: A
NEW QUESTION 31
Which two statements are true about NSR? (Choose two.)
- A. NSR requires graceful restart to function properly
- B. NSR requires GRES to function properly.
- C. NSR requires redundant REs.
- D. NSR requires only one RE.
Answer: B,C
NEW QUESTION 32
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. generate
- B. static
- C. aggregate
- D. kernel
Answer: A
NEW QUESTION 33
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.3.3.3 are more preferred than the default local preference
- B. Routes from 10.2.2.2 are less preferred than the default local preference
- C. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- D. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
Answer: A
NEW QUESTION 34
Which IPv6 extension header notifies intermediary devices that they must inspect the packet's options?
- A. routing header
- B. fragment header
- C. destination options header
- D. hop-by-hop options header
Answer: A
NEW QUESTION 35
You have been asked to provision a service provider's network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)
- A. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
- B. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
- C. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
- D. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
- E. All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.
Answer: A,D,E
NEW QUESTION 36
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
- D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
Answer: C
NEW QUESTION 37
Which statement is true about the operation of Layer 2 VPNs?
- A. Service provider routers must evaluate the IP header of packets as they traverse their network
- B. Layer 2 VPNs allow CEs to use different encapsulations on either side of the VPN
- C. Layer 2 VPNs do not permit CE devices to operate a Layer 3 protocol with each other
- D. Layer 2 VPNs require that CE devices use the same Layer 2 encapsulation
Answer: B
NEW QUESTION 38
Click the Exhibit.
You are using OSPF as your IGP in your network.
You have applied the OSPF configuration shown in the exhibit to router R1.
Which statement is true in this scenario?
- A. Router R2 will not have a route to subnet 172.16.4.0/24.
- B. Router R1 will send a default route to router R2.
- C. Router R1 must be configured as a stub area for Area 0.0.0.0.
- D. Router R3 will not have a route to subnet 172.16.3.0/24.
Answer: D
NEW QUESTION 39
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. It consists of a single broadcast domain.
- B. Nodes share a physical medium.
- C. Nodes use a step-up algorithm when collisions are detected.
- D. Nodes can successfully transmit simultaneously.
Answer: A,B
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface xe-0/0/0.0 can only form a single adjacency
- B. Interface ge-1/0/0.0 can only form a single adjacency
- C. Interface ge-3/0/0.0 has a default metric of 10
- D. Interface xe-0/0/0.0 has a default metric of 10
Answer: B
NEW QUESTION 41
......
Juniper JN0-362 Exam Certification Details:
| Number of Questions | 65 |
| Exam Name | Service Provider Routing and Switching Specialist |
| Sample Questions | Juniper JN0-362 Sample Questions |
| Passing Score | Pass / Fail (60-70% Approx.) |
| Exam Registration | PEARSON VUE |
| Exam Code | JN0-362 JNCIS-SP |
| Exam Price | $300 USD |
| Duration | 90 minutes |
| Recommended Training | Junos Intermediate Routing (JIR) Junos Service Provider Switching (JSPX) Junos MPLS Fundamentals (JMF) |
Pass Juniper JN0-362 Exam Quickly With ValidBraindumps: https://www.validbraindumps.com/JN0-362-exam-prep.html