NSE7_EFW-6.4 Exam Questions Get Updated [2021] with Correct Answers
Practice NSE7_EFW-6.4 Questions With Certification guide Q&A from Training Expert ValidBraindumps
How to Prepare For Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
Preparation Guide for Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
Introduction
Fortinet is a Sunnyvale, California-based American multinational company. It develops and markets products and services for cybersecurity, such as firewalls, anti-virus, intrusion prevention, and protection for endpoints. Fortinet was founded by brothers Ken Xie and Michael Xie in 2000. FortiGate, a firewall, was the first product of the business. Wireless access points, sandboxing, and encryption for messaging was later added by the company.
By 2004, over $90 million in funding had been received by Fortinet. In November 2009, the company went public, raising $156 million via an initial public offering. Fortinet launched its Security Fabric architecture in 2016, which included integration and automation with other network security products and vendors from third parties.
Fortinet is the world’s biggest company, service provider, and government agency. Fortinet empowers its customers across the evolving attack surface with insightful, seamless security and the power to take on the borderless network’s ever-increasing performance requirements today and into the future. Without compromise, only the Fortinet Security Fabric architecture can provide security to tackle the most important security problems, whether in networked, app, cloud, or mobile environments. In most security appliances delivered worldwide, Fortinet ranks number one, and more than 450,000 clients trust Fortinet to secure their companies.
NSE certifications serve as an objective indicator of the candidateâs technical knowledge and skills, which are valuable assets to the individual, as well as to current and future employers. This document explains the Enterprise Firewall 6.4 NSE7 EFW-6.4 exam test of the NSE certification in detail with all the topics included and helping preparatory material. The exam difficulty is also discussed with methods of overcoming that difficulty by studying the NSE7 EFW-6.4 exam dumps.
How much Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Cost
The Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Costs USD 400. As the exam costs may vary country or region vise, it is always recommended to check the official website to see what’s the cost of the exam for your country. The total cost for preparing for the exam will include study materials as well as NSE7 EFW-6.4 dumps and NSE7 EFW-6.4 practice exams. Refer to the official website by clicking here for more info on pricing.
The benefit of obtaining the Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certification
You must make sure you have the best qualifications and experience when working as an IT field engineer to allow you to perform your job position as efficiently as possible. And this implies that the advantages of having an NSE certification should be recognized by you. Having certified to support you with your work has so many amazing advantages. NSE certification will help you to:
- Build up consolidated solutions and cut down risks
- Demonstrate value to current and potential employers
- Be recognized in the industry of security professionals
- Leverage Fortinetâs full range of network security products
- Validate your network security skills and experience
NEW QUESTION 70
What global configuration setting changes the behavior for content-inspected traffic while FortiGate is in system conserve mode?
- A. av-failopen
- B. ips-failopen
- C. utm-failopen
- D. mem-failopen
Answer: A
Explanation:
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-security-profiles-54/Other_Profile_Considerations/Conserve%20mode.htm
NEW QUESTION 71
Examine the following partial output from a sniffer command; then answer the question below.
What is the meaning of the packets dropped counter at the end of the sniffer?
- A. Number of packets that matched the sniffer filter and were dropped by the FortiGate.
- B. Number of total packets dropped by the FortiGate.
- C. Number of packets that didn't match the sniffer filter.
- D. Number of packets that matched the sniffer filter but could not be captured by the sniffer.
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=11655
NEW QUESTION 72
An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer. If the administrator knows that there is no NAT device located between both FortiGates, what command should the administrator execute?
- A. diagnose sniffer packet any 'udp port 500'
- B. diagnose sniffer packet any 'udp port 4500'
- C. diagnose sniffer packet any 'esp'
- D. diagnose sniffer packet any 'udp port 500 or udp port 4500'
Answer: C
Explanation:
Capture IKE Traffic without NAT: diagnose sniffer packet 'host and udp port 500' -------------------------------------- Capture ESP Traffic without NAT: diagnose sniffer packet any 'host and esp' -------------------------------------- Capture IKE and ESP with NAT-T: diagnose sniffer packet any 'host and (udp port 500 or udp port 4500)'
NEW QUESTION 73
Which two statements about bulk configuration changes made using FortiManager CLI scripts are correct? (Choose two.)
- A. When run on the Device Database, you must use the installation wizard to apply the changes to the managed FortiGate device.
- B. When run on the Policy Package, ADOM database, changes are applied directly to the managed FortiGate device.
- C. When run on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation.
- D. When run on the All FortiGate in ADOM, changes are automatically installed without the creation of a new revision history.
Answer: A,C
NEW QUESTION 74
A FortiGate device has the following LDAP configuration:
The LDAP user student cannot authenticate. The exhibit shows the output of the authentication real time debug while testing the student account:
Based on the above output, what FortiGate LDAP settings must the administer check? (Choose two.)
- A. username.
- B. dn.
- C. cnid.
- D. password.
Answer: A,D
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=13141
NEW QUESTION 75
Which of the following statements are correct regardingapplication layer test commands? (Choose two.)
- A. They display real-time application debugs.
- B. They are used to filter real-time debugs.
- C. Some of them display statistics and configuration information about a feature or process.
- D. Some of them can beused to restart an application.
Answer: C,D
Explanation:
Explanation
Application layer test commands don't display info in real time, but they do show statistics and configuration info about a feature or process. You can also use some of these commands to restart a pr ocess or execute a change in its operation.
NEW QUESTION 76
View the exhibit, which contains a screenshot of some phase-1 settings, and then answer the question below.
The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel. To diagnose, the administrator enters these CLI commands:
However, the IKE real time debug does not show any output. Why?
- A. The log-filter setting was set incorrectly. The VPN's traffic does not match this filter.
- B. The debug shows only error messages. If there is no output, then the tunnel is operating normally.
- C. The debug output shows phase 1 negotiation only. After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1.
- D. The debug output shows phases 1 and 2 negotiations only. Once the tunnel is up, it does not show any more output.
Answer: A
NEW QUESTION 77 
Refer to the exhibit, which contains the output ofget system ha status.
Which two statements about the output are true? (Choose two.)
- A. Master is selected based on the priority configured underconfig system ha.
- B. The slave configuration is synchronized with the master.
- C. The HA management IP is 169.254.0.2.
- D. port7is used as the HA heartbeat on all devices in the cluster.
Answer: A,D
NEW QUESTION 78
Examine the output of the 'diagnose sys session list expectation' command shown in the exhibit; than answer the question below.
Which statement is true regarding the session in the exhibit?
- A. It was created by the FortiGate kernel to allow push updates from FotiGuard.
- B. It is for traffic originated from the FortiGate.
- C. It was created by a session helper or ALG.
- D. It is for management traffic terminating at the FortiGate.
Answer: C
NEW QUESTION 79
View the exhibit, which contains a partial routing table, and then answer the question below.
Assuming all the appropriate firewall policies are configured, which of the following pings will FortiGate route?(Choose two.)
- A. Source IP address 10.1.0.24, Destination IP address 10.72.3.20.
- B. Source IP address 10.72.3.27, Destination IP address 10.1.0.52.
- C. Source IP address10.73.9.10, Destination IP address 10.72.3.15.
- D. Source IP address 10.72.3.52, Destination IP address 10.1.0.254.
Answer: B,D
NEW QUESTION 80
View the exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. The web request was allowed by FortiGate.
- B. This web request was inspected using the root web filter profile.
- C. FortiGate found the requested URL in its local cache.
- D. The requested URL belongs to category ID 52.
Answer: C,D
NEW QUESTION 81
An administrator has enabled HA session synchronization in a HA cluster with two members. Which flag is added to a primary unit's session to indicate that it has been synchronized to the secondary unit?
- A. nds.
- B. dirty.
- C. synced
- D. redir.
Answer: C
Explanation:
The synced sessions have the 'synced' flag. The command 'diag sys session list' can be used to see the sessions on the member, with the associated flags.
NEW QUESTION 82
View the exhibit, which contains the output of a BGP debug command, and then answer the question below.
Which ofthe following statements about the exhibit are true? (Choose two.)
- A. The local router's BGP state is Established with the 10.125.0.60 peer.
- B. Since the counters were last reset; the 10.200.3.1 peer has never been down.
- C. The local router has not established a TCP session with 100.64.3.1.
- D. The local router has received atotal of three BGP prefixes from all peers.
Answer: A,C
NEW QUESTION 83
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The CA cannot resolve the name of the workstation.
- B. The CA cannot reach the FortiGate with the IP address 192.168.12.232.
- C. The FortiGate cannot resolve the name of the workstation.
- D. The remote registry service is not running in the workstation 192.168.12.232.
Answer: D
NEW QUESTION 84
View the exhibit, which contains a session entry, and then answer the question below.
Which statement is correct regarding this session?
- A. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
- B. It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.
- C. It is an ICMP session from 10.1.10.10 to 10.200.5.1.
- D. It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.
Answer: C
NEW QUESTION 85
View the exhibit, which contains the output of a debug command, and then answer the question below.
Which of the following statements about theexhibit are true? (Choose two.)
- A. The local FortiGate has been elected as the OSPF backup designated router.
- B. In the network on port4, two OSPF routers are down.
- C. Port4 is connected to the OSPF backbone area.
- D. The local FortiGate's OSPF router ID is 0.0.0.4
Answer: C,D
NEW QUESTION 86
View the following FortiGate configuration.
All traffic to theInternet currently egresses from port1. The exhibit shows partial session information for Internet traffic from a user on the internal network:
If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user's session?
- A. The session would remain in thesession table, and its traffic would start to egress from port2.
- B. The session would remain in the session table, and its traffic would still egress from port1.
- C. The session would be deleted, so the client would need to start a new session.
- D. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
Answer: B
Explanation:
Explanation
http://kb.fortinet.com/kb/documentLink.do?externalID=FD40943
NEW QUESTION 87
......
Prepare Top Fortinet NSE7_EFW-6.4 Exam Audio Study Guide Practice Questions Edition: https://www.validbraindumps.com/NSE7_EFW-6.4-exam-prep.html
Free Fortinet NSE7_EFW-6.4 Test Practice Test Questions Exam Dumps: https://drive.google.com/open?id=1EJJFCJ1MIYrcGlNs5xWFp_d8el5VGk-S