Real Exam Questions CLTD Dumps Exam Questions in here [Sep-2021]
Get Latest Sep-2021 Conduct effective penetration tests using CLTD
NEW QUESTION 32
A logistics company operates 10 distribution centers in China totaling 20 million square meters of floor space Based on the typical utilization factors, how many total square meters are devoted to storage?
- A. 10 million
- B. 15 million
- C. 5 million
- D. 20 million
Answer: C
NEW QUESTION 33
A transit privilege permits a shipper to:
- A. avoid paying tariffs to local authorities.
- B. temporarily stop a shipment to physically transform products.
- C. stop at any port of call without prior notification.
- D. enter a foreign/free trade zone (FTZ) to perform transportation services.
Answer: D
NEW QUESTION 34
What may be the cause if the value of inventory is greater than the value of the net working capital?
- A. Receivables are too high.
- B. High level of obsolescence.
- C. Cost of goods sold (COGS) is too high.
- D. Inventory is too high.
Answer: B
NEW QUESTION 35
A vessel operating under the threat of piracy or hostile military action is protected by the:
- A. country closest to the vessel at the time of attack.
- B. United Nations (UN) military forces.
- C. naval forces of the flag of registry.
- D. shipping company registry.
Answer: C
NEW QUESTION 36
Which Incoterm ® applies only to ocean transportation where the exporter is responsible to bring the goods to the port?
- A. Free on board (FOB)
- B. Free alongside ship (FAS)
- C. Delivered at place (DAP)
- D. Ex works (EXW)
Answer: B
NEW QUESTION 37
A supply chain manager is revising their organization's supply chain strategy with a greater emphasis on collaborative supply chain relationships.
Which of the following barriers poses the greatest impediment to implementing their new strategy?
- A. Vendor language and time zone differences
- B. Internal operational silos
- C. Transportation carrier's system limitations
- D. Enterprise resource planning (ERP) complexity
Answer: A
NEW QUESTION 38
Excluding cost, which of the following sets of criteria describes the primary drivers for transportation mode selection?
- A. Accessibility, capacity, transit time, reliability, and financial stability
- B. Capacity, transit time, safety, supply chain security participation, and availability
- C. Accessibility, capacity, transit time, reliability, and safety
- D. Capacity, transit time, reliability, safety, and supply chain security participation
Answer: B
NEW QUESTION 39
Which of the following forms of supply chain risk is considered the most disruptive?
- A. Environment
- B. Finance
- C. Supply
- D. Process
Answer: A
NEW QUESTION 40 
A company has prioritized customers A. B, and C. filling orders in that sequence.
What are the impacts to customer service levels for customers B and C?
- A. Customer B has higher service level
- B. 100% service levels for B and C
- C. Customer B and C have same service level
- D. Customer C has higher service level
Answer: B
NEW QUESTION 41
Which of the following strategies would a logistics manager most likely choose in order to reduce transportation cost?
- A. Outsourcing
- B. Consolidating shipments
- C. Relying on multiple shipments
- D. Engaging in a third-party logistics (3PL) partnership
Answer: C
NEW QUESTION 42
The surcharge applied by shipping lines to sea freight to offset adverse variation in fuel cost is called:
- A. peak season surcharge
- B. bunker adjustment factor
- C. repositioning charge
- D. currency adjustment factor
Answer: A
NEW QUESTION 43
From a health and safety perspective, which of the following sets of parameters must be taken into account when considering manual material handling?
- A. Task, load, working environment, and individual capacity
- B. Task, load, layout, and equipment
- C. Task, working environment, equipment, and individual capacity
- D. Layout, load, working environment, and individual capacity
Answer: A
NEW QUESTION 44
An operations manager is concerned that the order-to-cash cycle for their largest customer is too long The manager is referring to the time that elapses from when the company receives an order from the customer until the:
- A. warehouse is notified to ship the goods
- B. customer processes payment.
- C. company receives payment.
- D. customer receives that order in inventory
Answer: D
NEW QUESTION 45
A corporation is redesigning its warehouse and has decided to use a rack system that allows each level to be accessed individually by placing pallets on wheeled frames. The rack system that best meets this criteria is:
- A. drive-in.
- B. flow-through.
- C. double-deep.
- D. push-back.
Answer: A
NEW QUESTION 46
A transportation manager is interested in selecting the optimal mode of transportation based on 3 key criteria:
speed, availability, and dependability.
Which of the following modes best meets the criteria?
- A. truck and air
- B. Air and rail
- C. Air and ocean
- D. Truck and rail
Answer: B
NEW QUESTION 47
A carrier takes three weeks to deliver a product which has average sales of 1,000 units per week. The unit cost is $20 each and the carrying cost is 15%. What is the savings in the transportation inventory cost if management decides to change the mode of transportation to decrease delivery time to one week?
- A. S3,000
- B. $2,000
- C. $9,000
- D. $6,000
Answer: B
NEW QUESTION 48
A logistics manager is asked to perform a total cost analysis for the organization. Which of the following trade-offs is critical to consider?
- A. Landed costs vs. production costs
- B. Transportation costs vs. inventory carrying costs
- C. Distribution costs vs. order processing costs
- D. Inventory carrying costs vs. production costs
Answer: B
NEW QUESTION 49
A logistics team has developed new packaging for their best-selling product that reduces the packaging costs by 60% and the overall package size by 25%. The material can no longer be stacked on pallets and must be shipped and stored in non-stackable, returnable plastic bins. Which of the following statements bests represents the potential trade-offs of implementing this change?
- A. Higher labor costs, improved customer service, and no change in warehouse costs
- B. Decrease in warehouse costs increase in transportation costs, and no change in customer service
- C. Higher labor costs: increase in warehouse costs, and an increase in transportation costs
- D. Improved customer service, increase in warehouse storage costs, and a decrease in transportation costs
Answer: B
NEW QUESTION 50
A non-profit transportation membership cooperative that arranges for the domestic or international shipment of member's cargo over any mode of transportation is known as a(n):
- A. freight broker association.
- B. integrated service provider.
- C. shipper's association.
- D. freight bureau.
Answer: C
NEW QUESTION 51
A manufacturer must consider the long-term effects of its products' impact on the environment. A key product design consideration is:
- A. material handling
- B. packaging options
- C. facility planning
- D. routing and scheduling
Answer: B
NEW QUESTION 52
A corporation is redesigning its warehouse and has decided to use a rack system that allows each level to be accesses individually by placing pallets on wheeled frames. The rack system that best meets this criteria is:
- A. drive-in
- B. flow-through
- C. double-deep
- D. push-back
Answer: A
NEW QUESTION 53
Which of the following factors would be the greatest challenge for a firm planning to ship goods internationally by truck?
- A. Complex rules and regulations
- B. Variations in road conditions
- C. Variable cost of fuel
- D. Unpredictable weather and climate
Answer: A
NEW QUESTION 54
A corporation is projecting annual sales at S35 million, cost of goods sold (COGS) at S25 million, and administrative expenses at $3 million. In order to meet its corporate inventory turns goal of 5.0, their inventory level must average:
- A. $7 million.
- B. $5 million.
- C. $4.4 million.
- D. $7.6 million.
Answer: D
NEW QUESTION 55
A company setting up a warehouse wants to maintain a first in, first out (FIFO) stock rotation. Which of the following storage systems should they utilize?
- A. Flow racking
- B. Block stacking
- C. Pallet racking
- D. Push-back racking
Answer: C
NEW QUESTION 56
......
Authentic Best resources for CLTD Online Practice Exam: https://www.validbraindumps.com/CLTD-exam-prep.html
Get the superior quality CLTD Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1WlHk7OFwuQqdt4UvcebIm7rsp2ZYRzum