Try NSE5_FMG-7.0 Exam Valid Dumps with Instant Download Free Updates
NSE5_FMG-7.0 Dumps First Attempt Guaranteed Success
NEW QUESTION # 18
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- B. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
Answer: A
NEW QUESTION # 19
Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.)
- A. You must create a MEA special policy on FortiManager using the super user profile
- B. You must open the ports to the Fortinet registry
- C. The administrator must have the super user profile.
- D. When you configure MEA, you must open TCP or UDP port 540.
Answer: A,C
NEW QUESTION # 20
Which three settings are the factory default settings on FortiManager? (Choose three.)
- A. Reports and Event Monitor panes are enabled
- B. Username is admin
- C. FortiAnalyzer features are disabled
- D. port1 interface IP address is 192.168.1.99/24
- E. Password is fortinet
Answer: B,C,D
NEW QUESTION # 21
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?
- A. virtual-wan-link
- B. auto-discovery
- C. port2
- D. port1
Answer: A
NEW QUESTION # 22
What does the diagnose dvm check-integrity command do? (Choose two.)
- A. Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM
syntax - B. Verifies and corrects duplicate VDOM entries
- C. Verifies and corrects database schemas in all object tables
- D. Verifies and corrects unregistered, registered, and deleted device states
Answer: B,D
Explanation:
6.2 Study Guide page 305 verify and correct parts of the device manager databases, including: - inconsistent device-to-group and group-to-ADOM memberships - unregistered, registered, and deleted device states - device lock statuses - duplicate VDOM entries
NEW QUESTION # 23
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to download IPS packages
- B. Allows FortiManager to run real-time debugs on the managed devices
- C. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
- D. Allows FortiManager to automatically configure a default route
Answer: C
NEW QUESTION # 24
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
- B. 192.168.0.1/24
- C. 10.200.1.0/24
- D. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
Answer: C
Explanation:
FortiManager_6.4_Study_Guide-Online - page 209
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of 192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/2.
NEW QUESTION # 25
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?
- A. The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager
- B. The administrator must use the Add Model Device section and discover the FortiAnaJyzer device
- C. The administrator must use the correct user name and password of the FortiAnalyzer device
- D. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
Answer: B
NEW QUESTION # 26
Which two settings must be configured for SD-WAN Central Management? (Choose two.)
- A. You can create multiple SD-WAN interfaces per VDOM
- B. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.
- C. SD-WAN must be enabled on per-ADOM basis
- D. When you configure an SD-WAN, you must specify at least two member interfaces.
Answer: C,D
NEW QUESTION # 27
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
- A. Trainer must close Student's workflow session before approving the request
- B. Trainer does not have full rights over this ADOM
- C. Student, who submitted the workflow session, must first self-approve the request
- D. Trainer is not a part of workflow approval group
Answer: D
NEW QUESTION # 28
What will happen if FortiAnalyzer features are enabled on FortiManager?
- A. FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices
- B. FortiManager can be used only as a logging device.
- C. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager
- D. FortiManager will reboot
Answer: D
NEW QUESTION # 29
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric.
Given the administrator's actions, which statement correctly describes the expected result?
- A. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only.
- B. The authorized FortiGate will be automatically added to the Training ADOM.
- C. The authorized FortiGate will appear in the root ADOM.
- D. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors.
Answer: C
NEW QUESTION # 30
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?
- A. FortiManager will not allow the administrator to delete a referenced address object
- B. FortiManager will disable the status of the referenced firewall policy
- C. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
- D. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy
Answer: D
NEW QUESTION # 31
Which two items does an FGFM keepalive message include? (Choose two.)
- A. FortiGate license information
- B. FortiGate configuration checksum
- C. FortiGate uptime
- D. FortiGate IPS version
Answer: B,D
NEW QUESTION # 32
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?
- A. The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager
- B. The administrator must use the correct user name and password of the FortiAnalyzer device
- C. The administrator must use the Add Model Device section and discover the FortiAnaJyzer device
- D. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
Answer: D
NEW QUESTION # 33
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- B. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
Answer: A
Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.
NEW QUESTION # 34
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- B. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
Answer: D
Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.
NEW QUESTION # 35
View the following exhibit, which shows the Download Import Report:
Why it is failing to import firewall policy ID 2?
- A. The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate
- B. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.
- C. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager
- D. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager
Answer: A
Explanation:
FortiManager_6.4_Study_Guide-Online - page 331 & 332
NEW QUESTION # 36
What is the purpose of ADOM revisions?
- A. To create System Checkpoints for the FortiManager configuration.
- B. To save the current state of all policy packages and objects for an ADOM.
- C. To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision
- D. To save the current state of the whole ADOM.
Answer: B
Explanation:
Fortimanager 6.4 Study guide page 198
NEW QUESTION # 37
View the following exhibit.
Which of the following statements are true based on this configuration setting? (Choose two.)
- A. This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.
- B. This setting will enable the ADOMs feature on FortiManager.
- C. This setting is applied globally to all ADOMs.
- D. This setting will allow automatic updates to the policy package configuration for a managed device.
Answer: A,C
NEW QUESTION # 38
What does a policy package status of Modified indicate?
- A. FortiManager is unable to determine the policy package status
- B. The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager
- C. The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.
- D. The policy package was never imported after a device was registered on FortiManager
Answer: C
NEW QUESTION # 39
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?
- A. ADOM2
- B. ADOM2 object database
- C. File system
- D. ADOM1
Answer: A
NEW QUESTION # 40
Refer to the exhibits.
Exhibit one.
Exhibit two.
An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?
- A. The Training system template has other default settings
- B. The Training system template does not have assigned devices
- C. The ADOM is locked by another administrator
- D. The DNS addresses in the default system settings are the same as the Training system template
Answer: A
NEW QUESTION # 41
......
100% Guarantee Download NSE5_FMG-7.0 Exam Dumps PDF Q&A: https://www.validbraindumps.com/NSE5_FMG-7.0-exam-prep.html
Kickstart your Career with Real Updated Questions: https://drive.google.com/open?id=199a0K1S-QXZz_VtLLQ175fVE_NVES9Hp