[Dec 04, 2025] JN0-460 Exam Dumps 100% Same Q&A In Your Real Exam
JN0-460 Test Engine Dumps Training With 67 Questions
NEW QUESTION # 39
You are deploying a Campus Fabric IP Clos. You want to isolate the Corp subnet fro the loT subnet within the fabric.
Which solution will accomplish this?
- A. Create two VRFs and add both networks into each.
- B. Create one VRF and add both networks into it.
- C. Create two VRFs and add one network into each.
- D. Create one VRF and add one network into it.
Answer: C
NEW QUESTION # 40
What is meant when aMarvis Actionis shown as "AI Validated"?
- A. The issue which triggered an alert has been set to Resolved status.
- B. Marvis has observed an issue that is no longer present.
- C. Marvis has observed a recurring issue.
- D. Marvis has observed a new issue.
Answer: B
Explanation:
WhenMarvis Actionsdisplay "AI Validated," it indicates the issue was detected earlier but is nowresolved.
Marvis automatically validates remediation and marks the action closed once the anomaly clears.
References:
Mist AI Marvis Virtual Network Assistant Documentation - Marvis Actions and Status Definitions
NEW QUESTION # 41
How does MAC learning work in an EVPN-VXLAN environment?
- A. By relying on traditional Layer 2 switching methods
- B. Through control plane signaling, not flooding
- C. Solely through static configuration
- D. By using ARP requests exclusively
Answer: B
NEW QUESTION # 42
Deployment options for Wired Assurance include cloud-based management to:
- A. Simplify physical installations
- B. Limit remote access capabilities
- C. Decrease network flexibility
- D. Enhance scalability and accessibility
Answer: D
NEW QUESTION # 43
You have received aMarvis Actions Missing VLANnotification.
In this scenario, where is the problem?
- A. An access point is missing the VLAN.
- B. The gateway is missing the VLAN.
- C. A client is missing the VLAN.
- D. A switch is missing the VLAN.
Answer: A
Explanation:
AMarvis Actions Missing VLANnotification indicates that anaccess pointis missing a VLAN configured on other APs within the same site.
Marvis identifies configuration inconsistencies by comparing VLAN assignments across devices.
References:
JNCIS-MistAI Certification Page - Marvis Actions Troubleshooting
Mist AI Cloud Services Documentation - VLAN Mismatch Detection
NEW QUESTION # 44
Dynamic port configuration in Wired Assurance allows for:
- A. Automatic adjustment of port settings based on connected devices
- B. Static IP assignment only
- C. Manual port management
- D. Decreased network flexibility
Answer: A
NEW QUESTION # 45
You are going to adopt a switch in your organization's inventroy.
Where would you go to adopt this switch?
- A. The organization's Inventory page
- B. The list of switches page
- C. The Campus Fabric page
- D. The site's Inventory page
Answer: A
NEW QUESTION # 46
Which routing protocol does EVPN utilize for the control plane?
- A. MP-BGP
- B. VXLAN
- C. OSPF
- D. IS-IS
Answer: A
NEW QUESTION # 47
The choice between CRB and ERB in Campus Fabric depends on the desired __________ within the network.
- A. Cable management
- B. Lighting effects
- C. Routing flexibility
- D. Color coordination
Answer: C
NEW QUESTION # 48
A switch is claimed in a Mist organization using theactivation code.
What aretwo possible device statesthat the switch will have in this scenario?(Choose two.)
- A. Connected
- B. Unassigned
- C. Inactive
- D. Active
Answer: A,B
Explanation:
When a switch is claimed into a Mist organization, it appears in one of several states depending on connectivity and site assignment.
"After claiming, switches initially appear asUnassignedif they are not yet linked to a site. Once online and connected to Mist Cloud, they transition toConnectedstatus and begin receiving configurations and telemetry." Option A (Connected):Correct- indicates the switch is online and communicating with Mist Cloud.
Option B (Inactive):Incorrect - not a valid device state in Mist.
Option C (Active):Incorrect - "Active" is not a device state label in Mist.
Option D (Unassigned):Correct- indicates the switch has been claimed but not yet assigned to a site.
References:
Juniper Mist AI for Wired - Device Claiming and State Management Guide
Juniper Mist Cloud - Switch Onboarding Workflow
Juniper Mist Wired Assurance - Device Status Descriptions
NEW QUESTION # 49
What arethree wired Service Level Expectations (SLEs)that compriseJuniper Mist Wired Assurance?(Choose three.)
- A. Throughput
- B. Switch Health
- C. Capacity
- D. Coverage
- E. Successful Connects
Answer: A,B,E
Explanation:
Wired AssurancedefinesSLEs (Service Level Expectations)to provide measurable performance indicators for wired networks. These metrics identify root causes of network degradation by monitoring switch health, connection success, and throughput performance.
"Juniper Mist Wired Assurance delivers AI-driven insights across key wired SLEs including Successful Connects, Throughput, and Switch Health, giving visibility into user experience and switch performance." Option A (Capacity):Incorrect - capacity is used in wireless SLEs, not wired.
Option B (Successful Connects):Correct- tracks connection success rate and anomalies.
Option C (Switch Health):Correct- monitors hardware, software, and PoE status.
Option D (Coverage):Incorrect - pertains to wireless SLEs.
Option E (Throughput):Correct- measures data transfer rate, latency, jitter, and loss.
References:
Juniper Mist AI for Wired - Service Level Expectations (SLEs) Overview
Juniper Mist Wired Assurance - SLE Metrics Reference
Juniper Mist AI Cloud - Wired Visibility and Troubleshooting Guide
NEW QUESTION # 50
Switch events are classified into which three severity levels? (Choose three.)
- A. Critical
- B. Ignored
- C. Neutral
- D. Bad
- E. Good
Answer: C,D,E
NEW QUESTION # 51
Which of the following accurately describes VXLAN gateways?
- A. Facilitate communication between VXLAN and non-VXLAN environments
- B. Convert between different encryption protocols
- C. They only operate at Layer 3 of the OSI model
- D. Are used to decrease network throughput
Answer: A
NEW QUESTION # 52
What are three ways that data is collected from the Mist backend?(Choose three.)
- A. Webhook
- B. RESTful API
- C. SNMP
- D. WebSocket
- E. Syslog
Answer: A,B,D
Explanation:
Juniper Mist uses open, cloud-native APIs to providereal-time telemetry and integration.
Data is collected and streamed from the backend using:
RESTful APIs- for configuration, automation, and reporting.
Webhooks- to push events, alerts, or SLE changes to third-party systems.
References:Juniper Mist API and Webhook Integration Guide
NEW QUESTION # 53
Which two features are included with the wired assurance subscription? (Choose two.)
- A. Marvis Actions
- B. Wired Service Level Expectations
- C. Switch Templates
- D. vBLE engagement
Answer: B,C
NEW QUESTION # 54
The concept of micro-segmentation in Campus Fabric Architecture is important for:
- A. Enhancing traffic congestion
- B. Simplifying network protocols
- C. Reducing network security
- D. Improving network segmentation and security
Answer: D
NEW QUESTION # 55
You have three standalone switches. Two are EX4400-24x switches and one is EX4400-24MP. You want to use a template for configuration items for all three switches, however you need to configure specific items exclusive to the EX4400-24MP.
What are two ways to accomplish this? (Choose two.)
- A. In the switch template, find the Select Switches Configuration area and add a rule to only apply to a switch name that matches a defined string
- B. In the switch template, find the Select Switches Configuration area and add a rule to only apply to a specific switch model
- C. In the switch template, find the Select Switches Configuration area and add a rule to only apply to a switch running a specific version of Junos.
- D. In the switch template, find the Select Switches Configuration area and add a rule to only apply to a specific switch serial number
Answer: A,B
NEW QUESTION # 56
How do VXLAN and EVPN work together to support MAC learning in a scalable way?
- A. Implementing static MAC address tables for each VTEP
- B. Through dynamic flooding mechanisms in the data plane
- C. By relying exclusively on Layer 3 routing protocols
- D. Using EVPN as a control plane to distribute MAC addresses over VXLAN tunnels
Answer: D
NEW QUESTION # 57
When viewing an individual switch managed in Mist, the Utilities drop-down includes which two testing tools? (Choose two.)
- A. Perform Cable Test
- B. Upgrade Firmware
- C. Bounce Ports
- D. Replace Switch
Answer: B,D
NEW QUESTION # 58
How does MistAI Wired Assurance facilitate managing switches in a network?
- A. By providing AI-driven insights for optimizing switch performance
- B. By eliminating the need for physical switches
- C. Through manual switch configuration processes
- D. By focusing solely on wireless networks
Answer: A
NEW QUESTION # 59
The use of templates in Wired Assurance provisioning facilitates:
- A. Increased manual configuration errors
- B. Decreased network performance
- C. Standardization and scalability of network configurations
- D. Reduced network visibility
Answer: C
NEW QUESTION # 60
What advantage does multipath forwarding in EVPN offer for campus networks?
- A. Simplifies network design by eliminating the need for redundancy
- B. Decreases bandwidth utilization
- C. Increases network redundancy and bandwidth
- D. Restricts the use of multiple paths to prevent loops
Answer: C
NEW QUESTION # 61
What are two benefits of deploying EVPN in a campus network? (Choose two.)
- A. increased ARP flooding
- B. active-active forwarding
- C. control plane encapsulation
- D. control plane mac address learning
Answer: B,D
NEW QUESTION # 62
Which statement is true regarding Layer 2 tunneling in a Campus EVPN-VXLAN architecture?
- A. It is less scalable than traditional Layer 2 solutions
- B. It is primarily used for reducing the size of the broadcast domain
- C. It eliminates the need for virtual networks
- D. It enables the extension of Layer 2 domains over a Layer 3 infrastructure
Answer: D
NEW QUESTION # 63
......
JN0-460 Practice Test Pdf Exam Material: https://www.validbraindumps.com/JN0-460-exam-prep.html
JN0-460 Questions Pass on Your First Attempt Dumps for JNCIS-MistAI-Wired Certified: https://drive.google.com/open?id=1ue6yF59XWGNin1N04ivQv5pEnVGiJ39u