[Nov-2021] Verified EMC Exam Dumps with DES-1221 Exam Study Guide
Best Quality EMC DES-1221 Exam Questions ValidBraindumps Realistic Practice Exams [2021]
What is the cost of Specialist â Implementation Engineer, PowerStore Solutions Version 1.0
- Number of Questions: 40
- Passing Score: 70%
- Length of Examination: 90 minutes
- Format: Multiple choices, multiple answers
NEW QUESTION 16
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?
- A. Implement VLT and Dynamic Link Aggregation Group
- B. Implement Dynamic Link Aggregation Group
- C. Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group
- D. Configure VLT and Link Aggregation Control Protocol
Answer: D
NEW QUESTION 17
A storage administrator has provisioned a 50GB volume and presented it to an application. The application owner has requested that the volume be replicated to a secondary array. Which policy should be assigned to the volume to enable replication?
- A. Replication
- B. Performance
- C. Protection
- D. Remote
Answer: A
NEW QUESTION 18
Use the simulator to determine how many logical ports are currently marked for replication on the PowerStore appliance.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 19
An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?
- A. Imported LUN is deleted from the VNX2
- B. Storage Group containing the imported LUN is deleted
- C. Imported LUN is removed from the VNX2 Storage Group
- D. Host is removed from the VNX2 Storage Group
Answer: C
NEW QUESTION 20
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?
- A. Automatically added during Initial Configuration
- B. VASA is unsupported in PowerStore X models
- C. Manually added from vCenter server using add storage provider option
- D. Built into the PowerStore X system code
Answer: A
NEW QUESTION 21
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?
- A. Status: Term-Based, Type: Unlimited
- B. Status: Perpetual, Type: Open
- C. Type: Term-Based, Status: Active
- D. Type: Perpetual, Status: Active
Answer: D
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-cfg/validate-the-top-of- rack-tor-switch-versions-and-licensing?guid=guid-40c30b91-7fb2-4a26-bac7-4ae67c07bdfb&lang=en-us
NEW QUESTION 22
Which administrator tasks are needed to increase the size of a VMFS datastore without the use of the VSI plugin, mounted to an external ESXi host?
- A. Change the size of the datastore in vSphere and restart the VAAI service in PowerStore Manager
- B. Change the size of the datastore in vSphere and refresh the size of the volume in PowerStore Manager
- C. Change the volume size in PowerStore Manager and refresh the size of the datastore in vSphere
- D. Change the volume size in PowerStore Manager and restart the VASA service in vSphere
Answer: B
NEW QUESTION 23
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the appliance is online Appliance failure status
Cluster utilization - B. Whether the appliance is offline Appliance failure status Capacity utilization
- C. Whether the Node is offline Appliance failure status Node utilization
- D. Whether the Cluster is offline Node failure status
I/O utilization
Answer: B
NEW QUESTION 24
How is the upgrade process on a multi-appliance cluster run?
- A. Master appliance primary node first, then the peer node
- B. On one node at a time
- C. On all primary nodes first, then peer nodes
- D. In parallel on all nodes
Answer: A
Explanation:
Explanation
NEW QUESTION 25
What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?
- A. Select the RSA key for configuring the control path HTTPS certificate
- B. Select the folder location on the host for the program installation
- C. Configure the network port and interface for the management control path
- D. Configure the network port and interface for the host data path
Answer: D
NEW QUESTION 26
A Storage Administrator removed an appliance from the cluster. What is the status of the removed appliance's licenses?
- A. New licenses are created
- B. Licenses are erased
- C. No licensing impact
- D. Licenses becomes void
Answer: B
NEW QUESTION 27
A SQL Cluster with attached PowerStore storage has Volumes SQL1, SQL2, SQL4, SQL5 which all require write order preservation. The SQL administrator no longer requires SQL4 and has removed it from the database. The Storage Administrator goes to delete volume SQL4 and finds that the option is grayed out.
Why is the option to delete the volume unavailable?
- A. SQL4 still has replications
- B. SQL4 is part of a volume group
- C. SQL4 was renamed from SQL3
- D. SQL4 still has snapshots
Answer: A
NEW QUESTION 28
A storage administrator has provisioned 10*2GB volumes. 400MB of data is written to each of the ten volumes. What is the Thin Savings ratio for this configuration?
- A. 3:1
- B. 6:1
- C. 4:1
- D. 5:1
Answer: B
NEW QUESTION 29
What describes the process used in the Import External Storage migration architecture?
- A. Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage
- B. Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage
- C. Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage
- D. Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage
Answer: A
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
NEW QUESTION 30
1.a.1 What is the maximum number of appliances that can be connected to form a cluster?
- A. 4 in a PowerStore T cluster, 4 in a PowerStore X cluster
- B. 1 in a PowerStore T cluster, 1 in a PowerStore X cluster
- C. 4 in a PowerStore T cluster, 1 in a PowerStore X cluster
- D. 1 in a PowerStore T cluster, 4 in a PowerStore X cluster
Answer: C
NEW QUESTION 31
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports.
What is the correct response?
- A. "A" ports are output ports and "B" ports are input ports
- B. "A" ports are input ports and "B" ports are output ports
- C. All ports on the base enclosure are output ports
- D. All ports on the base enclosure are input ports
Answer: B
NEW QUESTION 32
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the Node is offline
Appliance failure status
Node utilization - B. Whether the appliance is online
Appliance failure status
Cluster utilization - C. Whether the Cluster is offline
Node failure status
I/O utilization - D. Whether the appliance is offline
Appliance failure status
Capacity utilization
Answer: D
NEW QUESTION 33
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?
- A. Status: Term-Based, Type: Unlimited
- B. Status: Perpetual, Type: Open
- C. Type: Term-Based, Status: Active
- D. Type: Perpetual, Status: Active
Answer: D
Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-cfg/validate-the-top-of-rack- tor-switch-versions-and-licensing?guid=guid-40c30b91-7fb2-4a26-bac7-4ae67c07bdfb&lang=en-us
NEW QUESTION 34
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?
- A. Port 54 needs to be enabled
- B. Port 54 has not been set to trunk mode
- C. Discovery network uses only native VLAN
- D. Dedicated port needs to be used for discovery network
Answer: D
NEW QUESTION 35
What does the remote replication Failover operation do?
- A. Fully synchronizes the source and destination data states and stops the current replication session
- B. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
- C. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
- D. Fully synchronizes the source and destination data states and reverses the replication direction
Answer: B
NEW QUESTION 36
Match the correct Base Enclosure port in column A to the Expansion Enclosure port in column B to show the correct cabling for adding a single expansion enclosure to a base enclosure.
Answer:
Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-isg/cable-the-base-enclosure-to-the-expansion-enclosure?guid=guid-d68d049f-2b77-489f-b1ab-553f4f3de8aa&lang=en-us
NEW QUESTION 37
Which network is used by the PowerStore for communication to the cluster database?
- A. ICM
- B. ICD
- C. IDN
- D. inter-node
Answer: D
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000t/pwrstr-ntwk-plang/powerstore-t- model-appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b
NEW QUESTION 38
Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?
- A. Two 25 GbE
- B. Four 1 GbE
- C. Two 10 GigE
- D. Two 100 GigE
Answer: D
NEW QUESTION 39
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?
- A. Implement VLT and Dynamic Link Aggregation Group
- B. Implement Dynamic Link Aggregation Group
- C. Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group
- D. Configure VLT and Link Aggregation Control Protocol
Answer: D
Explanation:
Reference: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/h18157- dell-emc-powerstore-clustering-high-availability.pdf
NEW QUESTION 40
......
Authentic Best resources for DES-1221: https://www.validbraindumps.com/DES-1221-exam-prep.html
DES-1221 Test Engine Practice Exam: https://drive.google.com/open?id=10CUDHTXY_-pqkxiS2ANeGvQ7Ki_1zsKv