TDA-C01 Dumps (2023) Prepare Your Exam With 66 Questions [Q19-Q38]

TDA-C01 Dumps (2023) Prepare Your Exam With 66 Questions

New TDA-C01 Dumps - Real Tableau Exam Questions

NEW QUESTION # 19
You have the following line chart that shows the average sales by month.

Which month had the biggest increase in swage sales compared to me previous month in 2019?

A. November
B. December
C. October
D. August

Answer: A

NEW QUESTION # 20
You have the following tiled dashboard that has one sheet.

You want to replace fit sheet with Sheet2.
What should you do?

A. From the context menu of Sheet3. select Deselect
B. From the context menu of Sheet3. select Remove Dashboard item
C. Right-click Sheet2 and select Add to Dashboard.
D. Drag Sheet2 to the dashboard.
E. Select Sheets and click the Swap Sheet button next to Sheet2.

Answer: C

NEW QUESTION # 21
You want to add a comment to March 2020 as shown in the following visualization.
You have the following sets in a Tableau workbook
* Top N Customers
* Customers of 2020
* Top N Products
* Sellers of 2020
Which two sets can you combine? Choose two

A. Sellers of 2020
B. Top N Products
C. Customers of 2020
D. Top N Customers

Answer: C,D

Explanation:
To combine two sets, they must have at least one dimension in common. In this case, Customers of 2020 and Top N Customers both have Customer Name as a dimension, so they can be combined using set operations such as union, intersection, or difference. Sellers of 2020 and Top N Products have different dimensions (Seller Name and Product Name), so they cannot be combined. Reference: https://help.tableau.com/current/pro/desktop/en-us/sets.htm https://help.tableau.com/current/pro/desktop/en-us/sets_create.htm#combine-sets

NEW QUESTION # 22
Open the link to Book1 found on the desktop. Open the CategoryPercentage worksheet.
Modify the bar chart show the percentage of sales for each Subcategory within every Category. The total percentage for every Category must be 100%.

A. Send us your feedback on it.
B. Send us your

Answer: A

NEW QUESTION # 23
You have the Mowing two tables that contains data about the books in a library.

Both tables are incomplete so there are books missing from the tables.
You need to combine the tables. The solution must ensure that all the data is retained Which type of join should you use?

A. left join
B. Full outer join
C. Right join
D. Inner join

Answer: D

NEW QUESTION # 24
You are the owner of an alert.
You receive an email notification that the alert was suspended
From where can you resume the suspended alert?

A. The Notification area of Tableau Prep
B. The Data Source page of Tableau Desktop
C. The My Content area of Tableau web pages
D. The Shared with Ma page

Answer: C

Explanation:
To resume a suspended alert, you need to go to the My Content area of Tableau web pages, where you can see all the alerts that you own or subscribe to. You can click on the alert name and then select Resume from the menu. You can also edit or delete the alert from there. Reference: https://help.tableau.com/current/pro/desktop/en-us/alerts.htm https://help.tableau.com/current/pro/desktop/en-us/alerts_manage.htm

NEW QUESTION # 25
Open the link to Book1 found on the desktop. Open the Movie Durations worksheet.
Replace the existing data source with the Netflix_2019 data source.

A. Send us your feedback on it.
B. Send us your

Answer: A

NEW QUESTION # 26
Open the link to Book1 found on the desktop. Open the Movie Durations worksheet.
Replace the existing data source with the Netflix_2019 data source.

Answer:

Explanation:
Send us your feedback on it

NEW QUESTION # 27
Open the link to Book1 found on the desktop. Use the Superstore data source.
Split the Customer Name field into two fields named First Name and Last Name.

Answer:

Explanation:
Send us your feedback on it

NEW QUESTION # 28
You have a data source that contains data tor every city in the Unites States. The following is a sample of the data.

You need to use the City dimension to create a dynamic filter that snows the cities that have a population greater than one million Which type of filter should you use?

A. Wildcard filter
B. General filter
C. Condition filter
D. Top filter

Answer: C

Explanation:
To use the City dimension to create a dynamic filter that shows the cities that have a population greater than one million, you should use a condition filter. A condition filter is a type of filter that shows only the values that meet a specified condition based on a measure or a calculation. You can create a condition filter by dragging a dimension to the Filters shelf and selecting Condition from the dialog box. Then you can enter a formula or choose an option that defines your condition.
In this case, you want to create a condition filter based on Population, which is a measure. You can drag City to the Filters shelf and select Condition from the dialog box. Then you can choose By field from the tab and select Population > Sum > Greater than > 1000000 from the drop-down lists. This will create a condition filter that shows only the cities that have a sum of population greater than one million.
The other options are not correct for this scenario. A general filter is not a specific type of filter, but a term that refers to any type of filter in Tableau. A wildcard filter is a type of filter that shows only the values that match a specified pattern or string, such as "New*" or "*ton". A top filter is a type of filter that shows only the top or bottom N values of a measure or dimension based on a ranking or an aggregation. Reference: https://help.tableau.com/current/pro/desktop/en-us/filtering.htm https://help.tableau.com/current/pro/desktop/en-us/filtering_condition.htm https://help.tableau.com/current/pro/desktop/en-us/filtering_wildcard.htm https://help.tableau.com/current/pro/desktop/en-us/filtering_topn.htm

NEW QUESTION # 29
You have the following dashboard that contains two visualizations.

You want to show only visualization at time. Users must be able to switch between visualizations.
What should you me?

A. A parameter and a calculated filed
B. Worksheet actions
C. Showhide buttons
D. Dashboard actions

Answer: D

NEW QUESTION # 30
Open the link to Book1 found on the desktop. Open SalesVSProfit worksheet.
Add a distribution band on Profit to show the standard deviation from- 1 to 1.

Answer:

Explanation:
Send us your feedback on it

NEW QUESTION # 31
Open the link to Book1 found on the desktop. Open Disciplines worksheet.
Filter the table to show the members of the Top10 set and the members of the Bottom10 set. There should be a total of 20 rows.

Answer:

Explanation:
check the steps below in explanation
Explanation:
To filter the table to show the members of the Top10 set and the Bottom10 set, you need to do the following steps:
Open the link to Book1 found on the desktop. This will open the Tableau workbook that contains the Disciplines worksheet.
Click on the Disciplines tab at the bottom of the workbook to open the worksheet. You will see a table that shows the disciplines, sales, and profit for each salesperson.
Click on the drop-down arrow next to Salesperson on the Filters shelf. This will open a menu that allows you to filter by different criteria.
Select Set from the menu. This will show you the sets that are available for the Salesperson field. You will see Top10 and Bottom10 as two sets that have been created based on the sales ranking.
Check the boxes next to Top10 and Bottom10. This will filter the table to show only the members of these two sets. You can also click on All to deselect all other values.
Click OK to apply the filter. You will see that the table now shows 20 rows, 10 for each set.

NEW QUESTION # 32
You publish a dashboard tut uses an attract. The extract refreshes every Monday at 10:00.
You need to ensure that the extract also refreshes on the last day of the month at 18:00.
What should you do?

A. From Tableau Server select the workbook select Refresh Extracts and then add a new extract refresh
B. From Tableau Server. select Schedules find the schedule of the extract, and change the frequency to the Last day of the month
C. From Tableau Desktop, open the Publish Workbook dialog box and configure the schedule.
D. From Tableau Server. select Schedules and change the priority of the existing schedule

Answer: A

Explanation:
To refresh an extract on Tableau Server, you need to select the workbook, select Refresh Extracts, and then add a new extract refresh. You can specify the frequency and time of the refresh, as well as any custom options. You can have multiple extract refreshes for the same workbook with different schedules. Reference: https://help.tableau.com/current/server/en-us/refresh_extracts.htm https://help.tableau.com/current/server/en-us/refresh_extracts_add.htm

NEW QUESTION # 33
Open the link to Book1 found on the desktop. Open Disciplines worksheet.
Filter the table to show the Top 10 NOC based on the number of medals won.

A. Send us your feedback on it.
B. Send us your

Answer: A

NEW QUESTION # 34
You have a dataset that contains daily sales by business segment from 2017 to the present You want to use monthly historical trends to predict sales by segment in the future Which three actions should you perform m order?
(Place the three correct options in order Use the arrows to move Options lo Answer Area I In Answer Area arrows to re order the options.)

Answer:

Explanation:

1 - Aggregate the date to month and year.
2 - Create a calculated field that uses the MODEL_QUANTILE function.
3 - Add the date to the Columns sfelf. Add the segment and the sales to the Rows shelf.

NEW QUESTION # 35
You have the following line chart that shows the average sales by month.

Which month had the biggest increase in swage sales compared to me previous month in 2019?

A. October
B. December
C. August
D. November

Answer: A

NEW QUESTION # 36
You have the following primary data source that contains a dimension named Dorm_Code.

You receive the following secondary data source that contains updated dorm codes.

You need to bring the updated dorm codes into Tableau and use the codes in existing visualizations. The new dorm codes must use the existing field name of Dorm_Code.
What should you do?

A. Create a data blend and select Edit Primary Aliases to replace the primary data source alias values with values from the secondary data source
B. Bring in the secondary data source by using relationships. From the Data pane, right-click Dorm_Name select Replace Reference, and then select Dorm_Name_New
C. Bring in the secondary table as a left join to the primary data source. From the Data Source page, select Create Calculated Field in the Dorm_Name field and enter [Dcrm_Name_New] in the calculation window
D. Bring in the secondary data source as a union.

Answer: B

Explanation:
Using relationships: You can use relationships to link the secondary data source with the primary data source based on a common field. This will allow you to use fields from both data sources in your visualization without creating new fields or duplicating data. You can then replace references to update the dimension values. For example, you can use relationships to link the updated dorm codes with the primary data source and then replace Dorm_Code with Dorm_Code_New in your visualization.
https://community.tableau.com/s/question/0D54T00000C5ldZSAR/update-data-view-based-on-dimension

NEW QUESTION # 37
You company has two divisions located in the United States and Germany Bach division has a separate database. The following is a sample of the sales data for the division in the United States.

The following is a sample of the sales data for me division in Germany.

You have population data in a file named Populatio.csv. the following is a sample of the data.

You plan to create a visualization that ml show tie sales per capita for each salesperson Each salesperson must be identified by identified by their full name.
You need to prepare the data to support the planned visualization. The data source must support being published .
Which four actions should you perform in order?
(Place the four correct options n order Use the arrows to move Options to Answer Area arrows to re-order the options.
Use Answer Area arrows to re-order the options)

Answer:

Explanation:

1 - Open Tableau Desktop
2 - Create a new column to concatenate the name for the Germany division.
3 - Union the sales data of both divisions.
4 - Join the sales data and the population data by using City as the join field